How to make wire glasses for a person. How Tanya made sunglasses for a doll

I needed to make sunglasses for the doll. There may be several options, or rather, small ideas throughout the entire process. Then I decided to try polymer clay.

Why not wire? I think it's possible too. It is easier to control the thickness of the frame with polymer clay, although the wire can be tapped in the right places) I made my first regular glasses from wire. The first sunscreens made of foamiran + wire (in the arms). Now let's try pg. You will get these little ones:

Needed:

Polymer clay;

Toothpick/stick;

Glass (from a frame, for example);

A printout with a photo of glasses in the size required for the doll;

A piece of translucent plastic (I used a regular kvass bottle!);

Super glue;

Scissors.

First, I found the type of glasses I needed on the Internet, printed it out in several sizes and chose which one was closest to the doll. I simply applied the cut out rectangles to my face. The easiest way to make such a set is in Photoshop or Illustrator (or in Corel, it doesn’t matter), but it depends on who you are. It’s possible in Word, probably)

Having chosen the desired option, cover it with glass. Roll out the clay into a thin sausage and carefully place it on the glass along the contour of the frame using a toothbrush. I pressed the glass a little so that the clay stayed in the right place.

We reduce it to the “bridge of the nose”:

We move and check for symmetry, if necessary, then tighten it back and forth with the tip of a toothpick. Bake. After baking, you can add clay in the right places to the required thickness, which can correct something. From the glass side, the frame will turn out neat and smooth, which is convenient. Or you can smooth the frame at the sculpting stage using varnish solvent. Or sand something after baking. Whatever is more convenient.

Then I made the arms and baked them.

I glued the arms to the main part with super glue. There is a point here: the strength of the structure will most likely still not be strong enough, sadly. You can try epoxy glue, because... is it stronger, or some other options. Or handle glasses carefully)

For glass we need translucent plastic. My glass was supposed to be black, but there was no black plastic nearby. So I carefully painted the brown piece using a sponge and black acrylic. It came out a little grainy, but evenly grainy and black.

Cut a piece of the required width, according to the width of the frame.

At the back we mark the boundaries for cutting with a pencil. You can cut it with nail scissors. Apply, check for evenness, cut off excess if there is any left.

As children, girls always loved to play with dolls, dress them up, and decorate them with various accessories. But, unfortunately, store shelves don’t always have what you need. There is a way out - to make jewelry with your own hands. This is quite a fun and not troublesome activity. This article will show you how to make glasses for This accessory gives a smart and respectable look not only to a person, but also to toys. Moreover, glasses can be made from those scrap materials that in most cases every person has at home. A little patience and free time - and the doll becomes a real fashionista!

How to make doll glasses from a paper clip: necessary materials

Two regular paper clips. The larger the doll, the larger the size of paper clips you need to choose.
Pliers. It's better to stick with the miniature version.
Wire cutters. But you can do without them.
Future owner of the accessory to try on.
Ten minutes of personal time.

How to make glasses from a paper clip for a doll: master class

The first step is to straighten the paper clips with your hands or using pliers. Next, we bend one end of the paper clip to the future “bridge” of the glasses and form part of the frame frame. We focus on the size of the doll's head. We do the same with the other tip of the paper clip. You should end up with a glasses base with two identical “connectors” for the lenses.

Using wire cutters, remove excess wire, if any. If there is no suitable tool, then we use what we have, that is, our hands. We twist the remaining tail of the paper clip in different directions until it falls off.

Let's move on to the temples of the glasses. We take another paperclip, straighten it, and then divide it into two equal parts with our hands or using wire cutters. Using pliers, we form as small ears as possible on the ends of each half.

We attach the ear arms to the frame frame and press them firmly using pliers. The optical accessory is ready!

Everything is very quick and simple, you just need to prepare the necessary materials before making glasses for the doll. "Monster High", by the way, such an accessory is also suitable. If you want more glamorous glasses, take colored paper clips, glitter and nail polish (suitable for hair or nails)

from wire: necessary materials

Pieces of wire (one short and two longer).
Wire cutters.
Pieces of corrugated paper.
Glue.
Items for shaping glasses. For a “bridge” under the bridge of the nose, a lighter or something else oval or rectangular is suitable. Depending on the size of the glasses and the desired shape of the frame (round, square, rectangular), select the appropriate item. This could be a bottle of nail polish or perfume, a writing pen, a tube of mascara, and so on.
Fantasy and some free time.

Round glasses made of wire: master class

If we are making an accessory for a toy, then its size should, of course, be the same as for a doll. Making glasses from wire is very simple.

We cover long pieces of wire with corrugated paper. These will be two blanks for the frame. We do the same with a short wire. This part will connect the blanks for the frame, that is, it will be a “bridge” for the bridge of the doll’s nose.

When the glue dries, we make the frame. We take a long wire, apply it in the middle to the selected object (for example, a bottle of nail polish) and form the desired shape. If there was a round object, then you should get a circle and two pieces of wire extending from it. We twist them together. This will be the bow. We cover it with corrugated paper. We do the same with the second long wire.

Before making glasses for the doll, wait for the glue to dry. We make a “bridge” over the bridge of the nose using another form (for example, a lighter). We cut off all excess wire with wire cutters.

Coat the ends of the “bridge” with glue. We attach the frame frame to the parts. We are waiting for the glue to dry. To hide its traces, we cover the joints with corrugated paper.

Now let's give the glasses a realistic look. To do this, the tip of each arch must be bent back. Remove excess wire using wire cutters. The glasses are ready. Now they can be decorated with sparkles, rhinestones and other decorative elements.

How to make glasses for a doll with lenses: necessary materials

A piece of wire. The length depends on the size of future glasses.
Items for shaping glasses. A round one can be made using a felt-tip pen, and a square one can be made using a dice.
Spoke.
Pieces of a plastic bottle.
Paint (acrylic or gouache with the addition of PVA glue).

Doll glasses with lenses: master class

You can use the wire method described above, or you can make a slightly different shape of the accessory. It would be a good idea to take measurements before making glasses for the doll. Or try on the accessory as it is being made.

So, we take the wire and make a bow at the tip using a knitting needle. We measure the distance from the ear to the temple. We bend the wire at a right angle. Using a cube we make a frame for one lens. We form a “frame bridge” under the bridge of the nose - a small arch; a knitting needle will be useful for this. We take the cube again and make a frame for another lens. Using a knitting needle, bend the second bow. The glasses are basically ready!

We make lenses. We cut out two identical parts from plastic. They must fit the frame. We try on the lenses to the glasses, trim them and glue them on. We are waiting for it to dry. Use paint to mask the traces of glue. The glasses are ready!

How to make sunglasses for a doll? Just take a bottle with dark or colored plastic. Glasses will perfectly complement rhinestones and sequins.

Anyone can make doll glasses: adults and even children. All you need is available materials, a little patience, free time, and you can enjoy the result!

Many craftswomen wonder how to make glasses for a doll. Probably, most of them also think that this is a very troublesome and not worthwhile task. However, in fact, everything is quite easy and simple. To make such an accessory you will need a thin wire, a small bottle, for example, of nail polish remover, wire cutters and any corrugated paper, and a little free time.

First, we need to cover the wire with a small piece of paper. Small because there would be less unnecessary scraps later. We wrap the paper. These will be the two parts of the future frame.

It is also necessary to glue the short wire. It will be needed to connect two long ones. Please take into account all sizes according to the size of your doll. Therefore, we will not adhere to certain measurements. Everything is purely individual.

Then we cover the arms with corrugated paper.

We cut off all excess. The connection remains. The short wire also needs to be bent; a lighter will do for this.

We cut off the remaining wire with wire cutters.

This is how we coat it with glue, you can use PVA or other office glue, you can also weld a paste (if time allows and you are willing).

We connect the frame and leave it for a short period of time so that it dries a little.

We paste a small piece of paper around the joints of the frame.

This is how a miracle should happen.

Both arms must be bent back, thus giving them the shape of real glasses. Again, we bite off all the excess. And at the end we bend the ends. Glasses are ready

If you want glamor, the glasses can be treated with hairspray with glitter, or painted with nail polish. Gorgeous glasses will come out. Like this. You couldn't imagine a simpler lesson. Moreover, such work will take very little time.

Glamorous and tasteful.

How to make glasses for a doll or animal from improvised materials and as quickly as possible?

This is exactly the task I faced.

I probably won’t make a discovery for anyone. But for me personally, this is what it was, one might say. Because this was my first time making glasses for a toy. And most importantly, both the customer and I were satisfied with the result.
That's why I'm sharing. Maybe it will be useful for someone))

Task: make small glasses for a toy 20 cm tall (in my case)
Materials: pliers and paper clips. and that's all))
Time: 10 minutes.

1. We will need: pliers and 2 ordinary paper clips. Well, I also had a volunteer assistant-controller from the next order))

2. Unbend the paper clip with your hands

3. Now we bend one “point” with pliers (well, what is the correct name for this?)))
I bend first from the edge where the “eye” of the paperclip was initially wider - I’m guided by it, this is exactly the “width” the glasses will be

4. We bend it on the other side, focusing on the size of the first half. We unscrew the remaining tail (if you have the right tool, you can bite it off, but I just twisted it back and forth and the tail fell off))

6. On each half of the second paper clip we bend the ears, the smallest ones you can

7. We hook these halves with the ears onto the “almost glasses” and clamp them with pliers, trying to fix them.

8. The result is obvious! Or rather, on the face)) We mercilessly insert the arms directly into the cat’s head, fortunately fleece allows this to be done painlessly. And near the spout we make a couple of stitches with thread. That's all!!! The intelligent cat is ready!

I really hope that my experience will be useful to someone. Or, on the contrary, it will inspire more perfect miniatures of the doll world))

By the way, paper clips can be very colorful))

I made several conclusions for myself: I urgently want mini pliers, wire cutters (or whatever they are called?)) and glue that will hold these paper clips.
But that's another story...

Glasses for a doll, accessories for a doll, how to make glasses with your own hands, do it yourself, glasses for a doll master class

Here he is the Cat with the whole wardrobe already
and - attention! - question. What did I make the pot out of?))

As children, girls always loved to play with dolls, dress them up, and decorate them with various accessories. But, unfortunately, store shelves don’t always have what you need. There is a way out - to make jewelry with your own hands. This is quite a fun and not troublesome activity. This article will show you how to make glasses for a doll with your own hands. This accessory gives a smart and respectable look not only to people, but also to toys. Moreover, glasses can be made from those scrap materials that in most cases every person has at home. A little patience and free time - and the doll becomes a real fashionista!